Lexia-3 lexia3 V47 Citroen/Peugeot Diagnostic PP2000 V25 with Diagbox V6.01 Software Support Peugeot 307

Now if you  buy Lexia 3,we will ship a Diagbox V6.01 Software as a present to you,which is worthy of   USD$15.

Lexia 3 pp200 has a good performed scanner for Citroen and Peugeot cars,lexia 3 citroen,lexia3 v47 can read fault code like other scanner tool, but it can do more function that can read identification, auto-scan, measured vales, actuator test, etc.

Lexia-3 Citroen/Peugeot Diagnostic PP2000 PPS Free Shipping

Description:
Latest version: Lexia-3: V47,PP2000: V25                        
Language: English, German, French, Japanese, Russian, Spanish, Portuguese, Swedish, Turkish, Dutch, Polish, Italian, Hungary, Greek, Czech

PP2000/LEXIA-3 Interface latest version, works for both Citroen and Peugeot!

Supported functions:
Unlike other universal car scanner tools which only read fault codes, this software performs nearly ALL the functions like the original dealer diagnostic tool. Our diagnostic interface contains K-Line multiplexor, CAN-BUS interfaces and SAE J1850 bus (both PWM and VPW).

The following diagnostic functions are supported:

1.Read identification
Displays complete identification of control unit, e.g. part number, software/hardware version, manufacturer, etc...

2. Read fault codes
Displays all stored and pending fault codes with complete description (e.g. "Rail pressure - too low pressure").
Program supports report printing or copy to clipboard.

3. Clear fault codes
this function clears all stored fault codes and other diagnostic information.

4. Auto-scan (complete car scan/test)
Detects all ECUs (electronic control units) installed in car and reads all diagnostic fault codes.

5. Measured Values
Program displays live Data like Engine Speed, Battery voltage, Oxygen Sensor, Coolant Temperature, etc. Values can be displayed in graph, 9 values at once, or full listing (all measured values). Logging to file is also supported, which allows offline analysis.

6. Actuator test
Actuator test activates particular actuator (e.g. turn on fuel pump, lock/unlock wheel, lock/unlock doors, cut off fuel, etc.)

7.Programming functions/Adaptation
This feature is of great importance in all vehicles because systems like Engine control units, Immobilizers, Airbags, Alarms, Body Control Units, and some others, require you to perform reset or programming procedures after car repair is done, or even configuration after replacing broken Control Unit.





Hardware and software requirements:

Software requires at least Intel Celeron/Pentium III 400 MHz, 128 MB RAM, 50MB free HDD space and USB 1.1 port (USB 2.0 recommended) and Microsoft Windows 98 SR2/2000/XP with the latest service pack installed.
If customer requires, we can prepare ready to work PC.

Compatible Vehicles:

It compatible with Citroen cars including, C1,C2,C3,C4,C6,C8,C-CROSSER,NEMO,BERLINGO,JUMPY,JUMPER,AX,SAXO,BX and so on. But please pay attention, according to our customer's experience, this item can not works good at C5 models.
It compatible with most Peugeot cars from 1995, but it can not work well with Peugeot 307.
If customer has these two types of cars, please pay attention. Please check with us first before purchase.
Diagnostics is performed via OBD-II connector (which is located near steering wheel) or via manufacturer-specific connector (only older cars, pre-2001).

Peugeot Bipper
Peugeot Boxer III
Peugeot Boxer III minibus
Citroen Nemo
Citroen Jumper III
Citroen Jumper III minibus 

Package includes:
1pc x Main unit with extension OBD2 cable
1pc x Long 9pin to USB cable
1pc x Short 9pin to USB cable
1pc x OBD2 cable
1pc x 16pin to Clip Cable
1pc x Instruction for Installation and Activation DVD for PP2000


Package Specification:

Length:29cm

Width: 22cm

Height: 8cm

Weight: 1.5KG

Frequently Asked Question:

Q: What is the way to do more cars?
A: You can choose the S.1279 module of PPS2000 Lexia-3 Citroen Peugeot and use with lexia-3 together. Then it can do more cars you want.

Contact information: