Fiat Scanner is a professional interface for diagnostics Fiat / Alfa Romeo / Lancia USB. Interface connected to a computer via the USB port, is also included OBD2 plug into the car. Fiat Scanner is equipped with LEDs indicating TX and RX. The device is designed for each car owner and small and medium-sized garages. Fiat Scanner is professionally designed but very easy to use.
Supported Operating Systems:
1. Engine
2. ABS
3. AIRBAG
Support Car models:
ACI Auto Communication Interface is 100% compatible with AUTO ENGIUITY
OE-LEVEL software, Support all Enhanced Options.
Function:
1. ACI Scan Tool is a professional PC diagnostics scan tool for all OBDII (OBD2) and EOBD IV+ compliant vehicles. ACI Scan Tool allows you to read the vehicle’s diagnostic trouble codes, live vehicle sensors (including wide-band O2 sensors), actuate bi-directional controls, reset adaptations, and view inspection system test results to quickly determine what service the vehicle requires.
2. Professional Diagnostics
In the professional repair business getting as much coverage as you can is important to effectively and quickly service any vehicle. We offer enhanced coverage options for 43 car brands: Ford/Lincoln/Mercury, GM-family, Chrysler-family Toyota/Lexus/Scion, Mazda, Nissan/Infiniti, BMW/MINI, Land Rover, Honda (Acura), Subaru, Mitsubishi, Isuzu, Porsche, Mercedes, Hyundai/Kia, Jaguar, and Audi/VW.
3. Not Simple Code Reader
So you read your vehicle’s trouble codes, now what? Reading the trouble codes from your vehicle is easy. But without live data and bi-directional controls, you may not have enough information to properly perform the repair. Don’t waste your time or money with simple code readers or hand-held scanners. ACI OBD2 scan tool can not only read your codes, but it can also show you live data, actuate components, and run system tests. With complete coverage, you can get the job done right the first time and prevent dreaded” comeback”.
4. NA Emissions and European MOT
You may have known that almost all states are using OBD2-based emission testing for all 1996 and newer passenger vehicles? Now with the 2010 legislation, even the 8500 -10000lb trucks are required to be OBD2 complaint. If you have a Check Engine or Service Engine Soon indicator illuminated, or a specific inspection system monitor test fails, your vehicle will fail its emissions test. With ACI OBD2 scan tool you can inspect your vehicle’s compliance before you wait in line and pay for the test.
5. Tuning Your Vehicle
Read live sensors such as wide-band O2 sensors, fuel adaptation, MAF, ignition timing advance, and lambda readings. If your vehicle supports wide-band O2 sensors, Scan Tool can show you real-time air/fuel mixtures. Finally, data log them all in TXT, CSV, and XML formats with 1ms sampling accuracy.
6. Performance Analyzer
Don’t buy into claims of increased horsepower or added torque; you can verify whether that new, expensive part really works. Do your own dynamometer and acceleration testing at your own convenience and without having to rent expensive dynamometer time.
For our European customers, our enhanced interface options also support Audi/VW, BMW, Chrysler/Dodge, Ford, Jaguar, Mercedes, and Toyota/Lexus diesel engines and the European-specific models.
ACI Enhanced Options:
Ford (EI01) 1995-2010
GM (EI02) 1995-2010
Toyota/Scion/Lexus (EI03) 1995-2010
Chrysler/Dodge/Plymouth/Eagle (EI04) 1996-2010
Mazda (EI05) 1996-2010
Hyundai and Kia (EI09) 1998-2010
Nissan and Infiniti (EI06) 2000-2010
BMW and MINI (EI07) 1996-2010
Honda and Acura (EI08) 1996-2010
Land Rover (EI10) 2002-2010
Jaguar (EI11) 1995-2010
Subaru (EI12) 1999-2010
Porsche (EI13) 1997-2010
Isuzu (EI14) 1996-2010
Mitsubishi (EI15) 1996-2010
Audi / VW (EI16) 1996-2010
Mercedes (EI17) 1998-2010
Here in this post, I want to share some mixed bunding tools to you. When you need them at the same time, and bought them together, you can save much money and get much convenience from these tool.
1、300 Tokens for Digimaster 3/CKM100/CKM200 Get Free Digiprog 3 Main unit and OBD Cable
3、FGTECH Galletto V53 Plus DELL D630 1GB Laptop with 80GB Hard disk
If are interested in these tools now, you just need click the pictures of them,then you will get know more information about them.After that,you will like them more .
The FLY100 SCANNER LOCKSMITH VERSION is the one-stop tool for H-ONDA all cars. It can do smart keys. No need to input password. The machine automatically calculate the password and enter the IMMO system.
FLY100 H-onda Description:
1.The FLY100 SCANNER LOCKSMITH VERSION IS THE one-stop tool for H-onda all cars. It can do smart keys.
No need to input password. The machine automatically calculate the password and enter the IMMO system.
2.FLY100 locksmith version main function: Do smart key for H-onda cars till 2011 year.
Specification:
1.Hardware and software requirements:
PC or laptop with either Windows 2000 Professional (SP4 or later) or XP (SP1 or later)
Hard disk drive with at least 400MB of free space
CD-ROM drive (if a high-speed Internet connection is not available)
RS232 port required to connect PC to IDT
Monitor capable of displaying in VGA mode or above (1024 x 768 recommended)
Use for the following cars: All H-onda model(H-onda & Acura from 1992 to 2008)
2.H-onda Electronic Control System:
1) Engine System
2) Theft Guard System
3) No key enter system, support serial and USB.
4) Antiblock system
5) Safty airbag system
6) Electronic air throttle system
7) Electronic booster system
8) Body electric system
9) Four-wheel turning system
10) ATTS
11) IMA
12) VTM-4
13) TPMS
FLY100 VS GNA600
FLY100 does not need password to enter immobilizer system, while GNA600 need
FLY100 supports odometer correction without removing the cluster, GNA600 cannot do odometer correction
FLY100 can do airbag reset, GNA600 cannot do this
FLY100 can do adaptation for remote controller, GNA600 cannot do this
FLY100 can make smart key without password, GNA600 cannot make smart key.
FLY100 VS HDS
FLY100 with HDS
FLY100 uses USB2.0, HDS use COM port
HDS cannot do Acura, FLY100 can do it
HDS need password when program keys, FLY100 doesn`t need it
HDS cannot do odometer correction, FLY100 can do odometer correction without removing the cluster
FLY100 provides free training
FLY100 provides free technical support
FLY100 provides free updates
HDS cannot work for new Guangdong H-onda
FLY100 can do airbag reset
HDS cannot do adaptation for remote controller, FLY100 can do it
HDS cannot make smart key, FLY100 can make it.
Function:
1.Primary Function: WiFi OBD-II Car Diagnostics Tool for Apple iPad iPhone iPod Touch
2.Compatible Apple Devices: Depends on the WiFi OBD Software used, but will require Apple iPhone, iPod touch and iPad iOS 3.0 or later and with WiFi capabilities.
Specifications:
1.Applicable Car Models: All models that support the OBD standard (Volkswagen, GM, Honda, TOYOTA, Nissan, Mazda, Ford, Peugeot, Citroen, BMW, Audi, Skoda, Subaru, Hyundai, Kia, Suzuki, Opel, Chrysler, Benz, Porsche, Renault, Fiat, Mitsubishi, Isuzu, Daihatsu, etc.)
2.Languages: Depends on WiFi OBD Software
3.Dimensions: 67 x 21 x 31mm
4.Cable Length: 1.88 meters
Support car list:
GM 1996 – to Date (OBD-II)
Ford 1996 – to Date (OBD-II)
Chrysler 1996 – to Date (OBD-II)
Toyota 1996 – to Date (OBD-II)
Honda 1996 – to Date (OBD-II)
NISSAN 1996 – to Date (OBD-II)
Many other Asian and European 1996 – to Date (OBD-II)
PS701 is a diagnostic tool for all Japanese cars, can diagnose TOYOTA, HONDA, MITSUBISHI, SUBARU, SUZUKI and NISSAN; PS701 can test for all electronic control systems not just for OBD2 engine system;PS701 can be comparable with the original equipment in some degree and can do matching keys for most cars.
1.PS701 can test TOYOTA, the testing manual is as follows:
2. PS701 can test SUZUKI, the testing manual is as follows:
3. PS701 can test SUBARU, the testing manual is as follows:
4. PS701 can test NISSAN, the testing manual is as follows:
5. PS701 can test MITSUBISHI, the testing manual is as follows:
From all above pictures you can get know how to operate this tool easily.If your cars which is in the list,and you need a tool like this,we think you can consider about this tool.You will find the PS701 JP diagnostic tool is really a good helper for you as well as your Japanese cars.
In accordance with releasing new products that introduce CAN communications systems, MMC has developed the MUT-III as a next generation diagnosis tester for servicing these new and future vehicles.
A personal computer (PC) is connected to the Mitsubishi MUTIII unit and used as a system’s control terminal, and communicates with a vehicle ECU through the VCI. In addition to being able to handle all diagnosis functions covered by the conventional MUT-II tester, the MUT-III system can display data as easy-to-understand diagrams and graphs on a large screen of the PC. Unlike the MUT-II, the MUT-III can retain data on all vehicles, from old to new models, classified according to destination in the PC’s hard disk. This eliminates the awkward but essential job with the MUT-II, of switching the data list (communications protocol data and diagnosis item list database) by replacing the ROM pack with another according to the vehicle model and year model.
Function:
New functions that make use of the advantages of the PC are also being developed. For example, the workshop manual viewer is a useful function for mechanics as they no longer have to carry around a thick manual and search for relevant pages while working on a vehicle. The workshop manual viewer is currently available for certain vehicle models, and allows users to retrieve the pages containing the failure code for a particular problem at the push of a button.
Specification:
Set Includes
(1)Vehicle Communication Interface (V.C.I.) (MB991824)
A communication interface used to connect the vehicle ECUs and the PC.
1)When connected with the PC
-Vehicle diagnosis (Interactive fault diagnosis)
-SWS communication; CAN communication support
-Drive recorder
-Volt, Ohm, measurement
-Fuel pressure measurement (Not available in US)
2)When used with the V.C.I.unit (disconnected from PC)
-V.C.I. Stand-alone diagnosis
-Drive recorder
-ECU reprogramming
-Volt,Ohm measurement
-Belt Tension measurement
(2) Memory Card
Stores data for ECU reprogramming, drive recorder, etc.
This is a standard, off-the-shelf memory card. The one provided (with reprogramming data) is a Compact Flash memory card (MB991853) inserted into the CF card adapter (MB991939).
(3) M.U.T.-III Main Harness A (MB991910)
Used when connecting the V.C.I. with vehicles that have only one 16-pin diagnosis connector.
-Supports fault diagnosis and ECU updating on the above-described vehicles
-Supports the CAN communication system
(4) M.U.T.-III Main Harness B (MB991911)
Used when connecting V.C.I. with vehicles that have a16-pin + 12-pin or 16-pin + 13-pin diagnosis connector.
For models equipped with only 12-pin (or 12-pin + 12-pin)diagnosis connector, connect the M.U.T.-II adapter harness(MB991498) to the end of this harness in the same as M.U.T.-II, and power is supplied from the cigarette lighter socket.
Today there is a new scanner to be introduced to you again.It is a wonderful scanner for dynamometer.So if you are looking for a tool like this Dyno-Scanner for Dynamometer and Windows Automotive Scanner,it is necessary to read this post by yourself.
Diagnose your Check Engine light, data log engine sensors, measure horsepower and torque, and measure instant and average fuel economy using your Windows PC. Enhanced OBD II options offer ABS and airbag support. Pays for itself in one or two uses by skipping the dealer and clearing the Check Engine light yourself. Dyno-Scanner can do this and much more.
Vehicle connection:
Dyno-Scannerner easily connects to your vehicle. Just plug the USB cable into the PC and the OBD II cable into the connector under the dashboard. It’s that easy!
Feature:
1. Powerful OBD II diagnostic scan tool and road dynamometer.
2. Works on 1996 or newer vehicles including American, Asian and European.
3. Read/clear the dashboard Check Engine light, display the freeze frame, and viewing live data streams.
4. Enhanced OBD II upgrade options support ABS and airbag diagnostic trouble codes.
5. Measure instant and average MPG and fuel used on any vehicle. Help save gas by monitoring fuel usage in real-time.
6. Unique parameters such as air/fuel ratio, boost pressure, instant and average MPG, fuel used and fuel rate (gal/hr).
7. Supports 264 vehicle parameters. The latest May 2007 SAE J1979 OBD II standards are fully supported.
8. Metric and English units of measure. I/M readiness.
9. Record any number parameters for as long as you want.
10 .Graphically view the entire recording with each data point time stamped.
11. Plugs into the OBD II connector located under the dashboard.
12. Access to thousands of generic and enhanced diagnostic trouble code definitions are displayed directly on screen.
13. Vehicle horsepower/torque and acceleration times are measured and graphically displayed.
14.0-60 time, 1/8 and 1/4 mile time and speed, MPG, and top speed.
15. All OBD II and EOBD protocols supported: CAN bus, VPW, PWM, ISO and KWP 2000.
16. High speed CAN 6x communication mode reads six sensors per vehicle message.
17. Supports diagnostic modes 1 through 9.
18. Supports enhanced diagnostic modes 13, 14, 17, and 18.
19. PC software works on all Windows operating systems: 98, ME, 2000, XP and Vista.
20. Multi-language:
English, Español (Spanish), Français (French), Magyar (Hungarian), Greek, Deutsch (German) and Italiano (Italian).
All these features will help you get know more about this Dyno-Scanner,and after you learn more about it,you will like it more and more.And of course these are not all the information about this tool,if you are interested in the Dyno-Scanner,you should visit its main site to get more key features of it.
There will be a new tool which names iOBD2 Diagnostic tool for Iphone By Wifi.From its name you can get know some features of it,that is it can works for Iphone by wifi.This feature is advanced than more diagnostic tools,so if you are interested in it,let’s go on learning about the iOBD2 Diagnostic tool for Iphone By Wifi together.
iOBD2 is a vehicle diagnostic tool for iPhone phones, and it communicates with these smart phones by WIFI. It supports OBDII/EOBDII. It records the data by the client software of the phone. It records data like engine speed, ignition time, fuel correction, fuel consumption, coolant temperature, when you are driving the car and it shows these data by form or graph forma.
Diagnostic Functions
Support vehicles with OBD II/EOBD protocol.
Read DTC
Clear DTC
Read data stream
Read freeze frame data, vehicle information
Oxygen testing
Mode 6 testing
Evaporative Emission System Leak Detection
Compatible Phones
Software for iPhone: compatible with iPhone and iPod OS4.1 version or above
iPhone/iPod touch Version Installation
Install by mobile
visit App Store and search iobd2 then download and install it
Install by iTunes
download and install iTunes, and search iobd2 in iTunes, download and install it.
Have you been hearbeat by the features of iOBD2 Diagnostic tool for Iphone By Wifi?If so,you can go to know more about it,and if you own one,you can do these functions of this tool with your Iphone,it is really a wonderful experience,and you can get more successful feeling.
There is a new tool to introduce you again.That is the Scan Diag Box Standard Kit ScanDia.After my share and you get know about this tool,I hope you can like it.
Product description:
Feature:
Technical Parameters:
www.obd4u.co.uk is your wise choice is powered by WordPress with the Cupcake Love theme. | Subscribe to Entries and Comments.